We offer a selection of slip-lock adjustable uprights that range from 2’-3’ to 14’-24’ high, as well as standard non-adjustable uprights, best suited for trade show booths and knee walls.
How far do you need to go horizontally? Because every room is different, we offer a complete selection of adjustable horizontal drape supports ranging from 2-3’ to 9’-16’ wide. They are designed to meet any room size and will support the chosen drape.
Once the hardware has been established, the drapes are selected for each horizontal section and sleeved on with ease.
Standard upright
- Non-adjustable
- Each equipped with 4 slots positioned every 90 degrees
- 8′ height had additional slots at 3′ high
- A chrome end cap comes standard on all 3′ uprights
- Other heights and extensions available
| Height | Suggested Base | Suggested Pin | Uses |
| 3′ | B814 | 1.5″ x 3″ | dividing trade show booths, crowd control |
| 6′ | B1416 | 1.5″ x 3″ | |
| 8′ | B1416 | 1.5″ x 3″ | standard trade show upright |
| 10′ | B181838 | 2″ x 6″-8″ |
Telescoping upright
- Unique slip-lock feature
- Easy to set-up and adjust without tools
- Locks automatically when inner pole is raised or lowered
| Size | Suggested Base | Suggested Pin | Type |
| 3′-5′ | B1818 | 2″ x 4″ | Two-piece |
| 4′-7′ | B1818 | 2″ x 4″ | Two-piece |
| 5′-8′ | B1818 | 2″ x 4″ | Two-piece |
| 6′-10′ | B181838 | 2″ x 6″-8″ | Two-piece |
| 7′-12′ | B181838 | 2″ x 6″-8″ | Two-piece |
| 8′-14′ | B181838 | 2″ x 6″-8″ | Two-piece |
| 9′-16′ | B181838 | 2″ x 6″-8″ | Two-piece |
| 12′-22′ | B242438 | 2″ x 8″-16″ | Two-piece |
| 14′-26′ | B242438 | 2″ x 8″-16″ | Two-piece |
| 3′-7′ | B1818 | 2″ x 4″ | Three-piece |
| 7′-17′ | B242438 | 2″ x 8″-16″ | Three-piece |
| 9′-23′ | B242438 | 2″ x 8″-16″ | Three-piece |
Horizontal Drape Supports
- Fully Adjustable with button click tops
- Metal hooks at each end slip into uprights slotted openings.
- The Rule of thumb is to use a horizontal that is 1′ less than the desired hanging length
| Part # | Size |
| TDS23 | 2′-3′ |
| TDS35 | 3′-5′ |
| TDS47 | 4′-7′ |
| TDS58 | 5′-8′ |
| TDS610 | 6′-10′ |
| TDS712 | 7′-12′ |
| TDS814 | 8′-14′ |
| TDS916 | 9′-16′ |
Curved Drape Support
- Three (3) piece drape support spans 10′ with a depth of 24″
- Requires three (3) standard or adjustable uprights and three (3) bases (sold separately)
- Curved drape support is not adjustable
- Maximum tube length is 59″ for shipping
- Create curved and wave walls
