Clamps & Supports

Attaches anywhere vertically along the length of 2 piece adjustable uprights. Featuring 3 slots for drape supports and used to add an additional drape support at any length or at any angle from your existing vertical upright.

• Clamp to mask any screen from 16:9, 4:3—almost any format—up to 16’ wide
• Allows for a continuous wall of drape to accommodate changes in ceiling heights, with no need to add additional uprights

Ideal for connecting fixtures to 2″ truss systems or pipe with 2″ (50.8 mm) outer diameter. Tightens down via a large wing-nut and has an M10 wing-nut accessory bolt.

• Great way of rigging pipe and truss
• Used on an upright or light duty truss to attach lighting
• Connect two to create light duty cheeseborough. Turns 360 degrees freely to any angle needed or can lock in at 90 degrees
• Available in 2”, 1.3/8” and .55”

Light-duty quick-release clamp for easy light fixture mounting

• Metal and plastic quick-release clamp with a removable stud and anM-10 x 1.5 bolt for lightweight light-fixture mounting
• Can be used to wrap around pocketed drape pipe
• Maximum weight 33lb/15kg

• Will not crush or tear fabric
• Black or white clips available

• Will not crush or tear fabric
• Black or white clips available

• Adapter tightens around standard truss pipe to hold sleeved drape on telescopic rod without the need to tie on
• Minimum two per drape horizontal support required

• Adapter attaches pin to table
• Great for mini tech or DJ Surround

• Clips over any standard or adjustable upright
• Provides additional support for a short side wall or banner
• Requires no additional hardware